Use an OTA firmware update when the RiderNav Display still works and you want the latest version. This is not the same as black-screen recovery. If the screen is fully black, use the recovery guide.
Before you update
Keep a steady power supply on the display.
Use a stable Wi-Fi connection. A phone hotspot also works.
Use your own microSD card: 8–32GB, formatted to FAT32. 32GB is the size we recommend. Insert it into the slot on the right side of the display. If the update cannot start, try a different, healthy card. If you use an 8GB or 128GB card and the OTA update fails, switch to a 32GB card. See SD card for RiderNav Display: OTA update only.
How to update
Go to Settings > System Update and tap Check for Updates. The system will look for a new version.
If a new version is found, tap Update Now to start the download.
When the download finishes, the display installs the update and restarts on its own. Do not power off the display during this process.
After installation, the system shows a success message. If it shows “Already up to date,” no further action is needed.
If OTA gets stuck or fails
If you have an R7M and the screen still works, use Manual firmware update via SD card (R7M).
If you have an R7X and the screen still works, use Manual firmware update via SD card (R7X).
If the whole screen goes black or the display does not respond, use If the screen goes black or an OTA update fails. The R7M and R7X share the same recovery package.