If Android Auto is connected on the RiderNav Display but sound — navigation, music, or calls — comes from the phone speaker instead of your helmet headset, the headset is usually not connected to both the display and the phone, or it cannot stay connected to two devices at once.
This page is only for sound coming from the phone speaker. If the headset does not pick up your voice, or Google Assistant does not hear you correctly, follow Using Google Assistant with Bluetooth headsets (Android Auto) instead.
Before you start
Android Auto already connects to the display.
Your helmet headset can stay connected to two devices at once: the phone and the RiderNav Display. Not every headset can do this. Check your headset’s manual, or ask the headset maker.
If this only happens on one phone, and the same display and headset work with another phone, leave the working phone as it is. On the problem phone, check Bluetooth, media audio, and call permissions.
Note: Common motorcycle headsets that can stay connected to two devices at once include Sena (20S, 30K, 50S, SRL series), Cardo (PackTalk, Freecom series), and similar models. Confirm your exact model with the headset maker.
Connect in this order
Connect the helmet headset to the RiderNav Display: go to Settings > Bluetooth on the display, then pair and connect the headset.
Connect the same headset to your phone: open the phone’s Bluetooth settings, then pair and connect it.
Start Android Auto: connect the phone to the RiderNav Display with a USB cable or wireless Android Auto, then launch Android Auto.
Once the headset, the display, and the phone are all connected, sound should come through the helmet headset.
If sound still comes from the phone
Confirm the headset can stay connected to two devices at once.
Confirm the headset shows as connected to both the RiderNav Display and the phone.
Disconnect everything, restart the display and the phone, and reconnect in the same order.
Check for a firmware update on the display: Settings > System Update, or see How to update RiderNav firmware (OTA).
Clear the Bluetooth pairings on the display and pair the headset again from scratch.
If you still need help
Tell us your smartphone model and Android version, your helmet headset model, and a screenshot of the Bluetooth connection status on both the phone and the display.
